山石防火墙Hillstone配置Zabbix SNMP监控
You are here: Cookbook > Getting Started > Configuring the Device to Communicate with Zabbix Using SNMP
Configuring the Device to Communicate with Zabbix Using SNMP
This example introduces how to configure the device to communicate with Zabbix using SNMP. Zabbix can monitor various network parameters of the device to ensure the safe operation of the device.
The following shows a network environment. The device connects to Zabbix using SNMPv2 to manage the device.
StoneOS
Step1: Configuring SNMP Agent | |
---|---|
Select System > SNMP > SNMP Agent.
|
![]() |
Step2: Configuring SNMP Host | |
---|---|
Select System > SNMP > SNMP Host. Click New.
|
![]() |
Step3: Configuring Trap Host | |
---|---|
Select System > SNMP > Trap Host. Click New.
|
![]() |
Step4: Enabling the SNMP Mode of the Interface | |
---|---|
Select Network > Interface and double click ethernet0/6.
|
![]() |
Zabbix:
Step1: Configuring Host Group | |
---|---|
Select Configuration > Host groups. Click Create host group.
|
![]() |
Step2: Configuring Templates | |
---|---|
Select Configuration > Templates . Click Create template.
|
![]() |
Step3: Configuring Application | |
---|---|
Select Configuration >Template > Applications. Click Create application.
|
![]() |
Step6: Configuring Graph | |
---|---|
Select Configuration > Hosts. Click E1100 > Graphs and click Create graph.
|
![]() |
文章来源于互联网:Configuring the Device to Communicate with Zabbix Using SNMP
本文来自,经授权后发布,本文观点不代表个人技术记录立场,转载请联系原作者。